Furnace Repair Services in Vancouver and Lower Mainland

A broken furnace can quickly turn your home into an uncomfortable and even unsafe place. At A2B Plumbing and Heating, we provide fast, reliable residential furnace repair services throughout Vancouver and the Lower Mainland. Whether your heat stops working suddenly or your system is showing signs of wear, we’ll get it fixed quickly and professionally.

Why Choose A2B Plumbing and Heating for Your Furnace Repair?

With years of experience and a commitment to excellence, we provide homeowners in Vancouver and the Lower Mainland with reliable furnace repair services. 

tankless water heater, repair, fixing leak

Our Residential Furnace Repair Services

We offer complete furnace repair services tailored specifically for homeowners. Whether it’s a small issue or a major breakdown, we’ve got you covered.

Full System Diagnostics

We begin every visit with a thorough inspection to pinpoint the root cause of your furnace problem. No guessing — just accurate, expert analysis.

Airflow and Filter Issues

Clogged filters or blocked ducts reduce efficiency and strain your system. We clean and correct airflow problems to help your furnace breathe better.

Blower Motor and Fan Repairs

If your furnace is blowing weak air or making strange noises, the blower motor or fan may be the issue. We repair or replace faulty components to restore proper airflow.

Thermostat Repairs and Replacements

A faulty thermostat can make your home feel too hot, too cold, or unevenly heated. We repair or upgrade thermostats for better control and comfort.

Gas and Electric Furnace Repairs

We service both gas and electric furnaces, ensuring safe, efficient operation regardless of your home’s setup.

Exhaust and Venting System Repairs

Proper venting is essential for safe operation. We fix damaged or blocked exhaust pipes to prevent carbon monoxide buildup and ensure safe combustion.

Routine Maintenance and Tune-Ups

Prevent costly breakdowns with seasonal maintenance. We inspect, clean, and optimize your furnace for peak performance.

24/7 Emergency Furnace Repairs

Proper venting is essential for safe operation. We fix damaged or blocked exhaust pipes to prevent carbon monoxide buildup and ensure safe combustion.

Common Furnace Repair Issues We Fix

Most furnaces give off warning signs before they completely fail. If you notice any of the issues below, it’s best to call us before it turns into a bigger problem. Here are some of the most common furnace problems we repair in residential homes:

Thermostat not responding

Your furnace won't start or maintain temperature if the thermostat is malfunctioning. We check both the thermostat and its connection to your furnace.

No Heat or Weak Airflow

If your furnace is running but not warming your home, restricted airflow or a blower issue could be the cause.

Cold Air Blowing from Vents

This may indicate a problem with the ignitor, gas valve, or heat exchanger — all of which we can test and repair.

Furnace Cycling On and Off

Short cycling can be caused by overheating, clogged filters, or faulty sensors. We’ll identify and correct the root issue to improve efficiency.

Overheating or Shutting Down

If your furnace shuts down soon after starting, it may be overheating due to a dirty filter, blocked vent, or failing safety component.

Pilot Light or Ignition Problems

Without a working ignition system, your furnace can’t produce heat. We service both standing pilot lights and electronic ignitions.

Loud or Unusual Noises

Banging, rattling, or squealing sounds are signs of worn parts or airflow problems. We’ll isolate the cause before it leads to further damage.

Gas Smell or Delayed Ignition

A gas smell is a serious concern. Delayed ignition can also cause small explosions inside your furnace. If you smell gas, call us immediately.

Cracked or Leaking Heat Exchanger

This is one of the most dangerous furnace issues. A cracked heat exchanger can leak carbon monoxide — we’ll inspect and replace it if needed.

Most furnaces give off warning signs before they completely fail. If you notice any of the issues below, it’s best to call us before it turns into a bigger problem. Here are some of the most common furnace problems we repair in residential homes:

24-7 emergency service

Emergency Furnace Repairs – 24/7 Service Available

Furnace breakdowns can happen without warning, leaving your home cold and uncomfortable—especially during colder months. A2B Plumbing and Heating provides fast, reliable emergency furnace repair services to restore warmth and safety to your home.

Our expert team is available 24/7 to diagnose and repair furnace issues promptly, ensuring your home stays warm and your family stays safe.

How much does furnace Repair Cost?

We provide honest, upfront pricing before any work begins. Here’s a look at common furnace repair part costs:

Furnace PartsRepair Costs
Heat Exchanger$1,500 – $2,500
Inducer Fan$700 – $1,200
Pressure Switch$200 – $390
Drainage Pipe$280 – $450
Exhaust Pipe$250 – $480
Pump$250 – $390
Ducane Furance

Final pricing depends on your furnace’s make and model and the complexity of the repair.

Brands of Furnaces We Repair

We repair all leading residential furnace brands, including:

Final pricing depends on your furnace’s make and model and the complexity of the repair.

Contact A2B Plumbing and Heating today to book your service!

What to Expect During Your Furnace Repair Service

1. Inspection – We start with a full system diagnostic to identify the problem.

2. Explanation – You’ll get a clear quote and repair recommendation.

3. Repair – We use high-quality parts and trusted techniques.

4. Testing – We confirm your furnace is running safely and efficiently.

5. Follow-Up Support: After the repair, we provide guidance on maintenance and are available for any future questions or services.

What our clients are saying

FAQs: Furnace Repair Questions Answered

What is involved in a furnace service?

A standard furnace service in the Lower Mainland includes a full system inspection, cleaning, and performance check. At A2B Plumbing and Heating, we inspect key components like the heat exchanger, blower motor, burners, ignitor, thermostat, and filters. We also check for gas or carbon monoxide leaks, clean dust buildup, ensure proper airflow, and test the system for safe and efficient operation. Regular servicing helps prevent breakdowns and improves furnace lifespan.

What is the most expensive part to fix on a furnace?

The most expensive part to repair or replace on a furnace is typically the heat exchanger. In residential furnaces, a cracked or damaged heat exchanger can cost between $1,500 and $2,500 to replace. It’s also one of the most critical components, as it handles heat transfer and, if damaged, can pose serious safety risks due to carbon monoxide leaks.

What is the most common problem of a furnace?

The most common furnace problem in homes across the Lower Mainland is restricted airflow due to dirty filters or blocked vents. This can cause poor heating, overheating, or even system shutdowns. Other frequent issues include faulty thermostats, ignition problems, and worn-out blower motors — all of which we regularly diagnose and repair at A2B Plumbing and Heating.

What is included in a furnace inspection?

A professional furnace inspection includes a full diagnostic of your system’s safety and performance. This typically involves:

  • Checking the thermostat calibration

  • Inspecting and cleaning the burner and flame sensor

  • Testing the ignitor and blower motor

  • Checking for gas leaks or carbon monoxide

  • Examining the heat exchanger for cracks

  • Verifying airflow and duct conditions

  • Checking electrical connections and safety switches

Contact the Best Furnace Repair Technicians Near You

If your furnace isn’t keeping your home warm, don’t wait. A2B Plumbing and Heating offers reliable, fast residential furnace repairs throughout Vancouver and the Lower Mainland — 24 hours a day, 7 days a week.

Contact Us Today

I Accept The Terms Of Use And Privacy Policy.

Scroll to Top